Let's talk about your project ↗
CORPORATE
We speak with measurement.
Not a claim of quality, but an inspected part. Our processes and our approach to measurement.
QUALITY APPROACH
Inspection does not begin at the end of production.
We set quality up not as an inspection step after manufacturing, but as a chain of checks running from design to delivery. Manufacturability problems are caught at the design stage, dimensional deviations at the machine and sealing problems at the test stage.
The approved 3D model and technical drawing are the reference of this chain. After manufacturing, ports, cavities and critical dimensions are checked against this reference.
Depending on the project we apply a pressure test of up to 350 bar, evaluate the result and prepare the manifold for delivery.
VERIFICATION BY MEASUREMENT
The cavity is checked against
its dimension on the drawing.
Cavity diameters, depths and port positions are compared with the dimensions on the approved technical drawing. Our machining tolerance is ±0.02 mm.
CHAIN OF CHECKS
Four control
points.
At every stage it is clear what is being checked.
Design approvalThe 3D model and technical drawing are submitted for customer approval before production starts.
Machining sequence checkThe clamping method, reference surface and tool paths are planned before manufacturing.
Dimensional checkPorts, cavities and machining tolerances are verified by measurement after manufacturing.
Pressure testDepending on the project a test of up to 350 bar is applied; the result is recorded.
MEASUREMENT AND DOCUMENTS
What we
measure with.
Measurement, testing and documents from material intake to delivery.
| Scope | Value | Note |
|---|---|---|
| Machining tolerance | ±0.02 mm | Checked by measurement |
| Test pressure | Up to 350 bar | Determined per project |
| Material intake | Crack detection | Material certificate on request |
| Pressure test unit | Up to 350 bar | Per project |
| Quality certificates | Available | Certificates to be added to this page |
| Distributorship certificates | Available | To be added to the brand pages |
| Test report | In the delivery file | For manifolds given a pressure test |
Is your drawing ready?
Let’s start together.
Share your hydraulic schematic or technical drawing. Our engineering team will send you technical feedback the same day.