Let's talk about your project ↗
AUTHORISED SALES AND DISTRIBUTION
Parker Hannifin.
Motion and control technologies; a broad cartridge valve range designed for the manifold.
ABOUT THE BRAND
Cartridges designed for the manifold.
| Headquarters | USA |
| Expertise | Motion and control technologies |
| Cartridge series | More than 25 product families |
| Hidromat status | Authorised sales |
Parker Hannifin holds a broad range of hydraulic components within motion and control technologies. Its cartridge valve catalogue covers more than 25 product families.
What Parker cartridges bring to manifold design is concrete: they take up less room than solenoid and stud-type valves, call for less machining in the manifold and remove the need to machine or press an orifice into the block. Body, piston, spring and orifice are pressed as a single unit; the valves are tested at the factory.
| Supply | Value | Note |
|---|---|---|
| Hidromat status | Authorised sales | Fitting to the block included |
| Supply | Made to order | Lead time stated at the quotation stage |
| Certificate of authorisation | Available | Document to be added to this page |
PRODUCT FAMILIES
Cartridge valve
families.
The main families in the Parker cartridge catalogue, with the ISO 1219 symbols of their functions.
Solenoid valvesSOLENOID VALVES
2-way poppet (single and bi-directional), 2-way spool, 3-way for high pressure, 4/2 and 4/3 spool solenoid cartridges.
Load controlLOAD CONTROL
Standard pilot-assisted load control valves; they hold the load and lower it under control.
ReliefRELIEF
Direct-acting and pilot-operated relief valves.
Pressure reducingREDUCING / RELIEVING
Pilot-operated pressure reducing and relieving valves.
Check valvesCHECK
Standard check valves and pilot-operated check valves.
Flow controlNEEDLE FLOW CONTROL
Needle-type flow control valves.
Proportional throttlePROPORTIONAL THROTTLE
Proportional throttle valves; the TEA series has an integrated shut-off valve.
Slip-in and logic2-WAY SLIP-IN
2-way slip-in cartridges, spool-type logic elements and a high-response 2-way valve.
Miniature cartridgesMINIATURE
Miniature cartridge solenoid and fluid valves for compact circuits.
Symbols are simplified to the ISO 1219 notation; the manufacturer’s catalogue governs current series and codes.
WHY A CARTRIDGE?
What do you gain
over a classic valve?
The difference between building the same circuit with piped plumbing and with a cartridge manifold.
| Aspect | Piped / bodied valve | Cartridge manifold |
|---|---|---|
| Space taken | Every valve needs its own body and connections | The valves sit together in a single block |
| Leak points | Every fitting and hose is a separate risk | The number of connections drops |
| Block machining | — | Standard cavity; no orifice machining or pressing |
| Maintenance | The line may have to be dismantled | The cartridge is unscrewed from the cavity and replaced |
HOW WE USE THEM
With the block,
a single responsibility.
We do not only sell the valve; we also produce the block it runs in.
Product selection to suit the circuitWe identify the right Parker Hannifin product for the flow, working pressure and control type.
Cavity machined to the standardWe design and machine the block to the cavity standard of the selected product.
Assembly and testingWe fit the valves, check the tightening torques and apply a pressure test up to 350 bar, as the project requires.
OTHER BRANDS
The other brands
we work with.
The right valve for the right block; we solve it independently of the brand.
Is your drawing ready?
Let’s start together.
Share your hydraulic schematic or technical drawing. Our engineering team will come back to you with technical feedback the same day.